Alarms & Monitoring
Showing all 10 results
6507 Mode Selector Panel
Durable bronze water tight panel for up to 6 buttons or switches.
The 6507 is a panel with integrated switches and indicators, used when the control station and mode selector are located in different areas. The 6507 is most often used with the 6506 Side Mount electronic control, is water tight and comes in either four or six selector button configurations.
6510 Control Base
The 6510 is a solid, bronze and stainless steel base for mounting control heads onto, allowing for switches, indicator lights or other button-based functionality to be added to a stand-alone control head. The 6510 is available with either 4 or 6 switch configurations.
The 6510 is compatible with the 6515, 6523, 6545 and 6555 control heads. Photo shown is of a 6510 base with a 6555 control head mounted.
6511 Control Base
The 6511 control base is a solid, bronze and stainless steel base for mounting control heads onto, allowing for switches, indicator lights or other button-based functionality to be added to a stand-alone control head. The 6511 is available with a 6 switch configurations and has an alarm built into the base.
The 6511 is compatible with the 6515, 6523, 6545 and 6555 control heads. Photo shown is of a 6511 base with a 6555 control head mounted.
Kobelt also produces alarm panels with part number 6511, be sure to clarify that the control base is required along with a control head, rather than a basic alarm panel.
6511-SP – Small Switch Panel
The 6511-SP series of small switch panels are primarily used for station selection, but can be used for any application that requires switching or indicators of this nature.
The 6511-SP series is available in water tight version, and allows for up to 6 switches or lamps. The photo shown is of a 6 switch panel.
6511-TP – Telegraph Panels
The 6511-TP series of telegraph panels allow for communication between the wheelhouse and the engine room. The 6511-TP panels are available in single and dual configurations, and can be integrated into any Kobelt electronic control system.
The photo shown is of a dual configuration model.
6512 Control Base
The 6512 control base is a solid, bronze and stainless steel base for mounting control heads onto, allowing for switches, indicator lights or other button-based functionality to be added to a stand-alone control head. The 6512 also has an LED strip that allows for indicators on running position and a 4 line digital readout. The 6512 comes with a dimmer function, and is available with up to 12 switches.
The 6512 is compatible with the 6515, 6523, 6545 and 6555 control heads. Photo shown is of a 6512 base with a 6555 control head mounted.
6700 Vitals Vessel System Monitoring & Smart Alarm Device
6700-0200 SmartBus Hub
The SmartBus Hub Module allows the user to connector up to five (5) additional SmartBus sensors. Kobelt offers three (3) options for SmartBus temperature sensors that can be used in any configuration, depending on your needs. Kobelt offers a barrel style temperature sensor (VT100) for immersion in air or liquid, a ring-terminal sensor (VT130) for direct connection to a metal surface, and a high-temperature sensor (VT110) for high-temperature applications.6700-0300 Analog Input Expansion Module
The Analog Input Expansion Module allows the user to connect up to six (6) additional analog sensors. The inputs are differential to reduce the probability of creating ground loops.6700-0310 Digital Input Expansion Module
The Digital Input Expansion Module allows the user to connector up to twelve (12) additional digital inputs. The inputs are separated into three banks to allow inputs with different references.6700-0320 SMS Communications Module
The SMS Communications Module connects to the Vitals System Monitoring Panel to provide support for broadcasting of system status over SMS messaging. Management and configuration of messages is handled directly through the Vitals System Monitoring Panel.*Note: Speaker and cabling sold separately (not included with Vitals).
7175: Analog Indicators
The 7175 Analog Indicator gauges provide reliable display of rudder angle position, rudder order command, or propeller pitch at your vessel’s control stations.
These small, 3-inch diameter, waterproof gauges include backlight for night and daytime operations. They are available in a Master or Slave configuration to suit your system’s requirements. A reversed rudder angle indicator is available to align with aft facing stations. They can be configured with up to a total of six units in an operational loop.
The indicators are driven by a position transducer such as the Kobelt 7163, 7168, or 7174 Rudder Feedback Units (RFU).
7178: Panoramic Rudder Angle Indicator
The 7178 is a large sized illuminated overhead rudder angle indicator typically installed in a high location in the wheelhouse to allow for viewing from almost all areas.
The 7178 is equipped with a manual dimmer, available in 12 VDC or 24 VDC versions with a 30,000 hour life cycle, and can be configured for easy centering of the pointers.
7180: Rudder Angle Indicator
